Brake Service & Replacement

Little intro, to explain the page is abaut tips and trickes + package

Our JEEP® tailored brakes service plan

You can choose to have a brake assessment service carried out to check the vital components (drums, pads, discs and callipers) for added safety, and if a replacement part is required, you can also benefit from the brakes services available.

Front brake pad replacement service:

FROM €XX

An all-inclusive price (parts and labour) with no surprises for a high-performance braking system.

  • A set of 4 pads for the front brakes
  • Labour for installation
  • Visual checks by JEEP® experts
  • Report of work carried out

TBD

How do I know when it’s time to get my car brakes checked? 
Every brake disc is marked with its MinTh – the minimum thickness at which it can operate safely. Make sure you replace your discs before they reach the MinTh! You should change your brake discs roughly every 60-70,000km, but the exact distance will depend on your car, your driving habits and the environment. If you notice it takes longer for your car to stop when you brake, get your brakes checked by a professional as soon as possible.

 

Should I replace all my brake pads, or can I get away with just changing the most worn?
It's important to replace all your brake pads at once to ensure safe, optimal braking performance. Check your maintenance/service booklet or your maintenenance e-book to find out how often you should check or replace your brake pads.

 

What is an easy way to increase the life of my brake pads?
The more weight in your car, the harder your brakes have to work. Clear out any unnecessary items from your car’s boot to maximise your brake pads’ lifespan. It will cut your fuel consumption too!

 

How can I spot if my brakes need attention?
As well as your car’s brake warning light, keep an eye out for unusual vibrations, juddering, softness or resistance in the steering wheel and brake pedal, your car veering to one side when you brake, unusual smells when braking. If you notice any of these signs, or things just don’t feel right, get your brakes and suspension checked immediately.

The JEEP® advice

OPTIMISE YOUR BRAKES
  • After changing the pads, break them in by lightly applying the brakes several times in a row.
  • After washing your vehicle, lightly apply the brakes to allow the heat generated to dry the parts.
  • Finally, remember that any braking system only performs well when the shock absorbers and tyres are in good condition.

BE ALERT

The braking system should respond instantly and precisely when you use the pedal. If you observe one or more of these signs of wear, consult us.

  • The vehicle swerves when braking: A wheel cylinder or a calliper may be seized, or more simply a tyre could be deflated. Worn shock absorbers can also have the same consequences.
  • The vehicle vibrates when braking: It is most likely caused by faulty brake discs, a loose part, or excessive slack in the front or rear axle.
  • The vehicle ""judders"" when braking: If the brakes lock up at the slightest strain, it may be a sign of a problem with the discs, drums or brake linings.
  • The brake warning light comes on: Your handbrake is on, the fluid level is too low or the pads are too worn. Do not take this warning lightly.
  • The brake pedal is hard: This could be due to a failure of the brake assist, hydraulic hoses or circuit, wheel cylinders or callipers.
  • The brake pedal is soft: The pedal sinks into a vacuum, you have to “pump” to be able to brake. Be careful, this is the sign of a serious problem with the hydraulic system.